WiFi Control COB LED Strip DC 12V 24V Tuya Smart FOB LED Ribbon 320 384 528LEDs Tape Light Dimmable LED Rope Backlight Lighting

Kindly Note:
1.It’s normal with the re-solder point, not any quality problem .
2. If the led strip is connected more than 5 meters,There may be a voltage drop, which causes the brightness of the light to be inconsistent. Please adding the voltage every 5 meters.

Features:
1. Very smooth & balance light, no lighting spot, no dark area.
2. Super bright and soft lighting.
3. Much more bendable and flexible than any other SMD led strip.
4. Cuttable and jointable, can make any length you want.
5. RA>90, much friendly for eyes.

Specification:
-Item: FOB LED Strip
-Working Voltage：DC12V 24V
-LED Quantity：320Leds/m , 384Leds/m , 528Leds/m
-Light Color: Warm White 3000-3500K , Natural White: 4000-4500K , White 6000-6500K , Blue , Green , Red
-Waterproof Rate: IP21 Non Waterproof
-Luminous flux: 80-100LM/M
-Cutting Length: 320Leds/m-every 50mm, 384Leds/m-every 42mm, 528Leds/m-every 45mm
-Color Rendering Index: Ra＞90
-Operation temperature: -20℃-+45℃
-Storage temperature: -20℃-+60℃
-View angle: 180°
-Plug Type： EU Power Plug

Data：
-320Leds/m : 8mm width , 2.2mm thickness , 7-9W/M
-384Leds/m : 10mm width , 2.2mm thickness , 10-12W/M
-528Leds/m : 8mm width , 2.2mm thickness , 14-16W/M

√ WiFi Set Instructions:
1. Scan the QR code of the product to download the APP and register the account.
2. Connect the controller and LED light strip, and switch on the power supply.
3. Open the Tuya Smart App and click Add Device (reset the device, switch the power on and off 3 times, (Power on, power off, power on, power off, power on), enter the flash state and complete the network distribution operation within 3 minutes).Select Lighting → Light Strip → Confirm the indicator is in flash, enter WiFi password → Click Next → Connection is added successfully → Click Finish to complete the product network distribution.
4. Enter the APP main interface in five parts: on/off, white light brightness adjustment interface, scene, plan, and Settings.
① Enter the white color ring interface to adjust the light brightness.
② When entering the scene interface, you can freely select different scenes. The scene can be edited and set, such as the light mode can be set to static, jump, breath, etc., and the scene can be freely named.
③ Enter the schedule interface (you can select the timing type, sleep and wake up)
④Enter the setting interface for timing (lights off, lights on, lights on and dimming, lights on and setting scene), countdown (delayed lights off), power response.
5.Button function: short press on/off, long press to adjust brightness. Quick double click to adjust the brightness, double click twice to adjust the brightness by 10%.

Package Included：
1 x COB Led Strip
1 x EU Power Plug
1 x WiFi Controller
1 x Remote (no battery)